MODEL : GS-SMG (MEDIUM HIGH VOLTAGE), LOOSE ELECTRICAL INSULATION RUBBER MAT, RoHS 2, IEC61111:2009 CLASS 3, DIAMOND
ELECTRICAL INSULATION RUBBER MAT, MODEL : GS-SMG (MEDIUM HIGH VOLTAGE), RoHS 2, IEC61111:2009 CLASS 3, DIAMOND, GREY, MINIMUM 40KV WITHSTAND VOLTAGE FOR 3 MINUTES (180 SECONDS) WITHOUT PUNCTURE, C/W
1) THIRD PARTY TNB DIGITAL QR CODE LAB TEST CERTIFICATE
2) SGS RoHS 2 TEST CERTIFICATE
A) Product Name
Loose Model : GS-SMG ( MEDIUM HIGH VOLTAGE) DIAMOND Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material :
NATURAL RUBBER ( NR ) BASE POLYMER
Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
Our GS-SMG is tested according to IEC61111:2009 Clause 126.96.36.199 under IEC 61111:2009 Class 3 , Ideal for Dielectric Voltage / Withstand Voltage: 40,000 VAC and Recommended Maximum use Voltage : 26,500 VAC
1) Brand : GSE™
2) Model : GS-SMG Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip DIAMOND , with anti slip DIAMOND surface to provide safe working environment, pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery .
4) Colour : GREY
5) DIGITAL Test Certificate : AVAILABLE
6) Product Compliance Status :-
A) BS EN 61111 Clause 188.8.131.52 Class 3 , Voltage Withstand Test
B) Comply to RoHS I & II , On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these chemicals are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product.
1) Nominal Thickness : 5mm
A) Brand : GSE™ , Loose Model : GS-SMG ,Switchboard Matting, ( GREY colour ) , 5mm Tk x 1,000mm (1m) Width x 1,000mm (1m) Length / pc
" Genuine Mark “ on Rubber Mat ( Bottom )
1)Trade Mark , Model # , Lot # , Certificate # , Test Certificate QR Code , IEC Class Code , Withstand & Max use Voltage & Colour Coding defined .